35 Ton Daikin Mcquay 2 Stage Geothermal Heat Pump

SmartSource™ water source heat pumps are designed using the latest technology to achieve some of the highest efficiency two-stage products in the market today. McQuay is the first manufacturer to offer ECM variable fan motors as a standard option across the whole product line, even in the smallest cabinet sizes, for unmatched performance and comfort in the industry. High EERs that far exceed ASHRAE 90.1 standards make these units perfect for LEED projects and rebate opportunities. All units are available geothermal ready from the factory with many features to easily match your application requirements.

Documents:

HVAC System Type
Water Source Heat Pump

Building Application
Ideal for schools, clinics, office buildings, government offices, senior living facilities and other other projects.

Featuring
High EER’s, up to 22.2 at full load and 29.8 in part load, efficient ECM motors standard across the whole product line with multiple field selectable airflow, exceptionally quiet with published sound ratings as low as 46 dBA, geothermal ready with options such as MERV 8 and MERV 13 filters.

Benefits
The new SmartSource line delivers unmatched energy efficiencies with quiet relability in a flexable vertical or horizontal configuration!

1: ECM Fan Motor: 4 field adjustable fan speeds with 5 operating mode options provide a wide range of airflow selections for quieter operation and lower energy consumption.

2: Copeland K-5 Scroll: or LG Rotary available in a variety of commercial voltages, mounted on a double isolation system for reduced sound and vibration.

3: Refrigerant Circuit: Utilizes R-410A refrigerant with a biflow thermal expansion valve for easy metering and four way solenoid reversing valve.

4: MicroTech III Controls: Easy open-protocol integration with optional LonWorks® or BACnet®.

5: Unit Status LED: Instant visuals on unit operation for easy troubleshooting and advanced diagnostics.

6: 4-Sides Filter Rack with Standard 2” or Optional 4” Filters: Designed for easy filter maintenance. MERV 8 & 13 filter options with gasketed filter rack meet LEED-NC EQc5 applications with leakage rate at less than 4 CFM per square foot of filter area at 0.5”ESP.

7: Stainless Steel Drain Plan: Sloped with lipless drain connection for positive condensate flow, meets ASHRAE 62.1 Section 5.11.

8: Flush Mounted Fittings: Easy one wrench connection, securely fastened to the cabinet corner posts.

9: Blower and Motor Orifice Ring: Easy service removal without having to remove the blower housing or disconnecting the unit from the duct work.

10: Durable Cabinet Construction: Heavy gauge steel with powder coated textured paint, lined with cleanable foilfaced insulation on the airside.

Many Factory-Mounted Options and Accessories

Four Unique Dehumidification Options:

Waterside Economizer - Reduces compressor energy consumption by using a cold water coil for cooling under unfavorable conditions.

Loop Pumps - Convenient factory mounted pumps with flow and head capabilities for most geothermal applications.

5, 10, 15 & 20 kW Electric Heat - For alternate heat source with controls for primary, supplemental, boilerless or emergency heat. (Available as a field-installed duct heater kit)

Non-Fused Disconnect Option - Convenient Power shut-off and lockout at the unit.

Extended Range Coaxial Heat Exchanger Coil and Piping Insulation - for geothermal application.

Insulation Options - Foil faced, closed cell or 1/2” standard fiberglass options for the air and compressor side of the unit.

Epoxy Coated Coils - For extra corrosion protection to meet ASTM B-11 3000 hour salt spray test.

Deluxe Sound Package - Reduces sound levels for quieter operation.

5-Year Extended Parts Warranty Available

If you could reduce your utility consumption by as much as 70%, is that something you’d be interested in? You’d probably say, “Of course!” If your current HVAC system is inefficient and outdated, a new geothermal heat pump from McQuay International could save you a lot of money every year and that’s not just a marketing line. US Department of Energy studies indicate most homeowners will save enough on heating and cooling with a geothermal heat pump to pay off initial system installation costs in as few as 5 years.

When you’re ready to make the geothermal heat pump switch, consider the McQuay SmartSource 3.5 Ton 2-Stage Vertical Geothermal Heat pump. The SmartSource 3.5 Ton is as versatile as any other geothermal heat pump model and it includes the respected Copeland UltraTech 2-stage compressor. A heat pump compressor does the important work moving heat around the system. A 2-stage compressor delivers better performance and a longer operating life than a regular single stage piece. A geothermal heat pump with a 2-stage Copeland is a great way to maximize savings even more than usual.

The McQuay SmartSource 3.5 Ton 2-Stage Vertical Geothermal Heat Pump comes standard with, of course, a Copeland 2-stage compressor, ECM fan motor with adjustable CFM settings, eco-safe R410A refrigerant, MicroTech III controls, easy-to-read LED display, bi-flow thermal expansion valve, filter rack that meets LEED-NC EQc5 applications, drain pan, blower ring, fittings, and a heavy gauge steel cabinet.